Slings are available in assorted colors
and patterns.
Please go to the Colors section for availability.
Step
1: Before measuring
Make sure all bolts are tight, and measure as closely to the bolts as
possible. If the sling measures other than a quarter-inch, half-inch,
three-quarter-inch, or inch, then round up to the next quarter-inch.
Step 2: Measure width
Measure the seat from the outside of the groove on the left sling rail
(Figure 1) to the outside of the groove on the right sling rail (Figure
2); repeat on the chair back. These
measurements are usually the same, but sometimes a chair’s seat
is wider than its back.
Step 3: Measure length Measure
from the top of chair’s rail to the bottom end of the rail, following
the chair’s contour (Figure 3).
No-Measure Method
Your old sling can be used as a pattern; e-mail Patio
Furniture Supplies for instructions on mailing the
sling. Original slings are not returned. For
instructions on how to remove slings, please go to the
How-To section.
Brown Jordan
Patio Furniture Supplies has many Brown Jordan sling
patterns. Click on the drop down menus to select your
product line and desired fabric. If you are unsure of
the Brown Jordan style, e-mail Patio Furniture
Supplies a photo of all your furniture, and we will
e-mail you the name of the product line. Or go to the
description page under the sling category, and click
on the link for Brown Jordan products.
|
FIGURE 1
FIGURE 2
FIGURE 3
|
